Description:

What do the pros need from a battery-powered chainsaw? ECHO asked, then designed the DCS-2500T to meet their demanding standards. On the strength of the ECHO enforce® 56V battery system, this lightweight beast is perfect for high-climbing professional arborists.

Features:

• Ultra lightweight for easy in-tree maneuverability
• Patented harness ring for easy and secure access
• Brushless motor

Specifications:

Battery:

• Voltage: 56V
• Motor: Brushless
• Battery Capacity: 2.5Ah
• Battery Capacity (Wh): 126 Wh
• Run Time: Up to 60 cuts on a single charge

Charging Options:

• Standard Charger: Included
• Rapid Charger: Available
• Recharge Time:
• Standard Charger: 75 minutes
• Rapid Charger: 38 minutes

Tool:

• Bar Length: 12 inches
• Chain Gauge: .050 inches
• Chain Pitch: 3/8" Low Profile

Weight: 7.3 pounds (with battery)

Warranty:

• Bare Tool Warranty: 5 years consumer, 2 years commercial
• Battery Warranty: 2 years consumer, 2 years commercial

Width	Weight	Height	Length
0 Inch	7.3 Pounds	0 Inch	0 Inch

Description:

Powerful doesn’t have to mean big with the Husqvarna 130. This reliable gas saw features our proprietary X-TORQ® engine to deliver superior performance, increased fuel efficiency and low emissions. Air Injection™ technology improves engine life by expelling larger dust and debris particles before they reach the air filter. And LowVib® technology keeps this saw comfortable to use, no matter the task.

Specifications:

• SKU: 967 10 84-11
• Chain Speed at Max Power: 55 fts
• Cylinder Displacement: 38 cm³
• Power Output: 2 hp
• Torque, Max: 1.84 Nm
• Torque, Max. at RPM: 8,000 rpm
• Clutch Engagement Speed (±120): 4,000 rpm
• Electrode Gap: 0.022 in
• Idling Speed: 3,000 rpm
• Ignition Module Air Gap: 0.012 in
• Maximum Power Speed: 9,000 rpm
• Oil Pump Type: Automatic
• Spark Plug: NGK BPMR7A
• Equipment:
• Recommended Bar Length, Min: 14 in
• Pitch: 3/8" mini
• Recommended Bar Length, Max: 16 in
• Chain Type: H37
• Bar Length: 40 cm (16 in)
• Sprocket Type: Spur 6
• Gauge: .050"
• Dimensions:
• Weight (Excl. Cutting Equipment): 10.36 lbs
• Sound and Noise:
• Sound Pressure Level at Operator's Ear: 102 dB(A)
• Sound Power Level, Guaranteed (LWA): 116 dB(A)
• Sound Power Level, Measured: 114.34 dB(A)
• Vibration:
• Equivalent Vibration Level (ahv, eq) Rear Handle: 5.5 m/s²
• Equivalent Vibration Level (ahv, eq) Front Handle: 3.72 m/s²
• Lubricant:
• Oil Tank Volume: 0.549 US pint
• Lubricant Type (Engine): Husqvarna 2 stroke or equivalent at 50:1
• Emission:
• Exhaust Emissions (CO₂ EU V): 804 g/kWh

Width	Weight	Height	Length
0 Inch	10.36 Pounds	0 Inch	0 Inch

Experience the robustness of our new 90cc petrol chainsaw range! Husqvarna 585 is developed for forestry and tree care workers looking for a robust and durable chainsaw that’s easy to maneuver and maintain even in tough conditions. This chainsaw combines proven technology with modern design and performance. The powerful X-Torq engine combined with the X-Cut C85/C83 chains delivers excellent cutting capacity. Equipped with X-Tough™ bar, available from 20” to 36”.

Width	Weight	Height	Length
0 Inch	16.5 Pounds	0 Inch	0 Inch

Description:

The MS 261 C-M has all the same great features as the MS 261 —low exhaust emissions, high fuel efficiency and robust performance— but also features the advanced STIHL M-Tronic™ engine management system. The STIHL M-Tronic™ onboard microprocessor digitally monitors and automatically compensates for changes in your work conditions, including elevation, temperature, fuel quality, varying octane levels, and dirty filters. The end result is maximum performance across a wide range of cutting conditions without making any manual adjustments. The MS 261 C-M also features redesigned cylinders and a slimmer, ergonomic housing for an impressive power-to-weight ratio.

Features:

• Reduced-Emission Engine Technology - Caring for Nature: The STIHL Inc. "Caring for Nature" seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines "low exhaust emissions" as being cleaner than EPA and/or CARB exhaust emission standards.
• Anti-Vibration System: STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Side-Access Chain Tensioner: The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.

Specifications:

• Power Source: Gas
• Powerhead Weight: 10.8 lbs.
• Guide Bar Length (Recommended): 16 in.
• Oilomatic® Chain: .325" RM3
• Chain Oil Capacity: 9.13 oz.
• Engine Power: 4.0 bhp
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc

Width	Weight	Height	Length
0 Inch	0 Gram	0 Inch	0 Inch

Description:

No pulling on cords, fuel mixing, or complicated startup procedures. With the MSA 200 C-B chainsaw, just squeeze the trigger and start cutting. In addition to easy starting, STIHL battery-powered tools produce zero exhaust emissions and are quieter than their gasoline-powered counterparts, making them an ideal choice for areas with emission or noise restrictions. Powered by an interchangeable STIHL lithium-ion battery, this chainsaw delivers the speed, cutting capacity, and run time to take on just about any cutting job on your property. The STIHL MSA 200 C-B is a cordless chainsaw tough enough to carry the name STIHL.

Run time may vary based on battery type, charge level and capacity, model, operating style, and conditions. Batteries and chargers can be purchased separately or as a combined set with tool.

Features:

• IPX4 Rating - This tool is IPX4-rated for weather-resistant construction and has been designed and tested for splash-water protection.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• Quick Chain Adjuster (QCA) (B) - The Quick Chain Adjuster (QCA) (B) allows the user to adjust the tension of the chain without the use of tools. This allows for easy chain adjustment.
• Raised and Printed Felling Stripe - The raised and printed felling stripe allows for precise aiming of felling direction.
• Brushless Motor - The advanced brushless motor virtually eliminates maintenance while supplying the power and performance you expect from STIHL.
• Lightweight Portability - This product is lightweight for easy portability, great maneuverability, and extended use.
• Magnesium Motor Housing - The magnesium motor housing provides added durability to this powerful chainsaw.
• Captive Bar Nut - The captive bar nut is held securely in place, which eliminates the risk of dropping or losing the bar nut during saw chain maintenance.
• Variable-Speed Trigger - The variable-speed trigger allows precise control for each task.
• Rubberized Soft-Touch Handle - Soft rubber texture is both easy to grip and makes the product comfortable to hold for extended periods. 
• Low Oil Sensor - The low oil sensor allows the operator to see when the oil is low so they can keep the bar and chain properly lubricated.
• Throttle Trigger Interlock - This safety feature must be depressed before the trigger can be activated.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Battery
• Powerhead Weight: 8.2 lbs.
• Weight (with AP 300 battery): 12.2 lbs.
• Guide Bar Length (Recommended): 14 in.
• Chain: OILOMATIC® 3/8" STIHL PICCO™
• Chain Oil Capacity: 7.1 oz.
• Battery System: AP System
• Run Time (with AP 300 battery): Up to 50 min.
• Voltage: 36 volt

Width	Weight	Height	Length
0 Inch	0 Gram	0 Inch	0 Inch

Description:

Robust, powerful cordless chainsaw for felling, pruning, cutting to length or building with wood. With STIHL 3/8" P - PS3 Pro saw chain for 20% more cutting performance than 3/8" P - PS, optimised energy efficiency and a 10% increase in the number of cuts per battery charge. Easy, convenient operation, ergonomic control lever with potentiometer function for infinitely variable speed control, STIHL Quick Chain Tensioning and transparent oil tank with tool-free cap. Sturdy metal bumper spikes for reliable and precise guidance of the chainsaw on wood.

Exterior design of STIHL guide bars are subject to change. Technical specifications remain the same.

Specifications:

• Bar Length: 35 cm (14 in.)
• Rated Voltage: 36 V
• Weight: 3.1 kg / 3.68 kg

Width	Weight	Height	Length
			0 Inch

Description:

The MS 180 C-BE is where handy meets high tech. This lightweight, easy-to-maneuver chainsaw’s first order of business is fast, easy starting with the STIHL® Easy2Start™ system. Just a light pull on the cord does it. Just as easy is the STIHL® Quick Chain Adjuster, which makes it possible to adjust the saw chain without tools. Unbelievably easy to use, the MS 180 C-BE is a big help with your list of woodcutting chores around the home.

Features:

• STIHL® Easy2Start™ (E) – The STIHL® Easy2Start™ system makes starting STIHL® outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL® products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
• IntelliCarb™ Compensating Carburetor – The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Quick Chain Adjuster (QCA) (B) – The Quick Chain Adjuster (QCA) (B) allows the user to adjust the tension of the chain without the use of tools. This allows for easy chain adjustment.
• Anti-Vibration System – STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ – The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Lockout – This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings – Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Made in America – A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Intended Use: Homeowner
• Engine
• Engine Power: 2.0 bhp
• Displacement: 31.8 cc
• Capacity
• Fuel Capacity: 8.5 oz.
• Chain Oil Capacity: 4.9 oz.
• Bar & Chain
• Recommended Guide Bar Length: 16 in.
• OILOMATIC® Chain: 3/8" PMM3
• Weight
• Powerhead Weight: 9.3 lbs.

Width	Weight	Height	Length
0 Inch	9.3 Pounds	0 Inch	0 Inch

Description:

The STIHL® MS 201 T C-M arborist chainsaw offers a superior power-to-weight ratio for optimal maneuverability and performance during in-tree work. This chainsaw features the STIHL M-Tronic™ intelligent engine management system that automatically adapts to changes in environmental factors such as fuel quality and altitude. The result is a reliable and fuel-efficient chainsaw that performs optimally in a variety of conditions. Featuring a simplified starting procedure and top handle, the MS 201 T C-M is designed to reduce your fatigue and increase your comfort, as well as provide you with much-needed balance. Professional jobs will be easier with the use of the STIHL® MS 201 T C-M—the ultimate arborist chainsaw.

Features:

• Top Handle (T) - The top-handle model is specially designed for in-tree professional use only!
• STIHL Easy2Start™ (E) - The STIHL Easy2Start™ system makes starting STIHL® outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL® products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
• STIHL Quickstop® - STIHL® chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• STIHL M-Tronic™ - This product features STIHL M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• Adjustable Automatic Oiler - The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Built-In Retractable Carry Ring - The built-in carry ring makes it convenient and easy to maneuver in and out of trees.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Interlock - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, durable, and corrosion resistant.

Specifications:

• Power Source: Gas
• Powerhead Weight: 8.2 lbs.
• Guide Bar Length (Recommended): 14 in.
• OILOMATIC® Chain: 3/8" PS3
• Chain Oil Capacity: 7.4 oz.
• Engine Power: 2.41 bhp
• Fuel Capacity: 10.5 oz.
• Displacement: 35.2 cc
• Intended Use: Professional

Width	Weight	Height	Length
	8.2 Pounds		0 Inch

Description:

When you rely on firewood to keep your home warm and cozy, you need a good chainsaw to build a solid woodpile. With an exceptional power-to-weight ratio, the STIHL® MS 250 is up to the job. It’s easy to use and combines great features to tackle clearing or cleanup tasks, as well as cut through small limbs and trees. For many years, the MS 250 has been a customer favorite, a model of efficiency and reliability that brings incredible performance every time.

Features:

• Easy-Access Air Filter Cover - The provided easy-access makes it almost effortless to remove the cover for fast filter cleaning or replacement.
• Winter/Summer Shutter - The Winter/Summer Shutter allows the carburetor to operate at optimum temperature year-round and helps to prevent carburetor icing when working below 50°F (10°C).
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, durable, and corrosion resistant.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• STIHL Quickstop® - STIHL® chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Made in America - A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Type: Gas-powered
• Weight: 10.1 lbs
• Bar Length: 18 inches
• Chain: .325" RM3 (OILOMATIC®)
• Oil Tank: 6.8 oz capacity
• Power: 3.0 HP (45.4cc engine)
• Fuel Tank: 15.9 oz capacity
• Best For: Home/yard use

Width	Weight	Height	Length
0 Inch	10.1 Pounds	0 Inch	0 Inch

Description:

The MS 251 WOOD BOSS® chainsaw is designed to deliver all the power you’d expect from STIHL® equipment with a comfortable and ergonomic design. The MS 251 WOOD BOSS® is perfect for felling small trees, pruning and thinning, and cutting firewood simply and efficiently. With up to a 20 percent increase in fuel savings and a 50 percent reduction in exhaust emissions—when compared to previous models—you can enjoy a longer run time while feeling good about your impact on the environment. Features like a Master Control Lever™ and reduced vibration make the MS 251 WOOD BOSS® a lean, easy-to-use machine that still packs plenty of power.

Features:

• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, durable, and corrosion resistant.
• Made in America - A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Weight: 11.0 lbs
• Recommended Bar Length: 18 inches
• Chain Type: .325" RM3 (OILOMATIC®)
• Chain Oil Capacity: 6.7 oz
• Engine Power: 3.0 HP
• Fuel Capacity: 13.2 oz
• Displacement: 45.6 cc
• Best For: Homeowner use

Width	Weight	Height	Length
0 Inch	11 Pounds	0 Inch	0 Inch

Description:

The MS 261 C-M gas chainsaw has all the same great features as the MS 261—low exhaust emissions, high fuel efficiency, and robust performance—but also features the advanced STIHL M-Tronic™ engine management system. The STIHL M-Tronic™ onboard microprocessor digitally monitors and automatically compensates for changes in your work conditions, including elevation, temperature, fuel quality, varying octane levels, and dirty filters. The end result is maximum performance across a wide range of cutting conditions without making any manual adjustments. The MS 261 C-M gas chainsaw also features redesigned cylinders and a slimmer, ergonomic housing for an impressive power-to-weight ratio.

Features:

• STIHL® M-Tronic™ - This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high-speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL® OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL® ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL®. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL® Quickstop® - STIHL® chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL® Quickstop® chain brake. The STIHL® Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL® Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Adjustable Automatic Oiler - The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy-to-use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!

Specifications:

• Power: Gas
• Weight: 10.1 lbs
• Bar Length: 18"
• Chain: .325" RM3 (pro-grade)
• Oil Capacity: 6.8 oz
• Power: 4.0 HP
• Fuel Capacity: 16.9 oz
• Engine Size: 45.4 cc

Width	Weight	Height	Length
0 Inch	10.1 Pounds	0 Inch	0 Inch

Description:

The MS 261 C-M gas chainsaw has all the same great features as the MS 261—low exhaust emissions, high fuel efficiency, and robust performance—but also features the advanced STIHL M-Tronic™ engine management system. The STIHL M-Tronic™ onboard microprocessor digitally monitors and automatically compensates for changes in your work conditions, including elevation, temperature, fuel quality, varying octane levels, and dirty filters. The end result is maximum performance across a wide range of cutting conditions without making any manual adjustments. The MS 261 C-M gas chainsaw also features redesigned cylinders and a slimmer, ergonomic housing for an impressive power-to-weight ratio.

Features:

• STIHL® M-Tronic™ – This product features STIHL® M-Tronic™ (M), a new generation of intelligent engine management that eliminates the low and high-speed carburetor adjustment screws, compensates for a dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• Ematic™ Lubrication System – The STIHL® Ematic™ guide bar, when used with STIHL® OILOMATIC® saw chain, provides proper lubrication and reduced oil consumption compared to conventional methods. Two strategically placed ramps in the guide bar rail help contain and direct oil to the sliding faces of the bar and chain links, as well as the rivets and driver holes—reducing bar oil consumption by up to 50%.
• STIHL® ElastoStart™ – The STIHL® ElastoStart™ starter handle is an exclusive STIHL® feature. This starting grip has a built-in shock absorber to reduce the effort required to pull the starter cord. It noticeably smooths out the compression forces felt during starting.
• IntelliCarb™ Compensating Carburetor – The STIHL® IntelliCarb™ Compensating Carburetor automatically adjusts the air/fuel ratio as the air filter becomes restricted, maintaining proper engine RPM. It uses clean air from the filter to regulate fuel flow—unlike typical carburetors that use air from the “dirty” side.
• STIHL® Quickstop® – The STIHL® Quickstop® chain brake system is designed to reduce injury risk in kickback situations. It stops chain rotation when activated by the operator’s hand or by inertia during a strong kickback—halting the chain in fractions of a second.
• Bumper Spikes – Provide improved control and help prevent pull-in during cutting.
• Adjustable Automatic Oiler – Allows the user to regulate lubrication to the guide bar and chain, adapting to different bar lengths and cutting conditions.
• Decompression Valve – Temporarily reduces cylinder pressure to make starting easier. Opens manually and closes automatically as the engine fires.
• Pre-Separation Air Filtration System – Enhances air filter efficiency by using centrifugal force to eject heavier debris before it reaches the filter, doubling the interval between cleanings.
• Side-Access Chain Tensioner – Makes chain adjustments easier using a bar wrench, as opposed to the standard adjustment screw location.
• Master Control Lever™ – A single lever that conveniently operates the choke, starting throttle lock, and on/off switch. Requires the throttle trigger to be pulled before shifting into the choke position.
• STIHL® Anti-Vibration System – Developed by STIHL® to reduce vibration levels in handheld power equipment, minimizing operator fatigue and increasing comfort during extended use.
• Toolless Fuel and Oil Caps with Retainers – Feature lift-and-twist functionality for quick removal and tightening without the need for tools.
• Throttle Trigger Lock – Enhances operational safety by requiring deliberate engagement before the trigger is activated.

Specifications:

• Power Source: Gas
• Powerhead Weight: 10.8 lbs.
• Guide Bar Length (Recommended): 16 in.
• Chain: OILOMATIC® .325" RM3
• Chain Oil Capacity: 9.13 oz.
• Engine Power: 4.0 bhp (brake horsepower)
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc

Width	Weight	Height	Length
0 Inch	10.8 Pounds	0 Inch	0 Inch

Description:

The MS 271 FARM BOSS® chainsaw is a mighty boss of a chainsaw. Loaded with features and technology, the FARM BOSS® starts with a highly efficient engine that delivers 20% longer run times between refuelings—while cutting exhaust emissions in half compared to the previous model. The pre-separation air filtration system is extraordinarily effective. Your air filter can last up to five times longer. All this STIHL® engineering in one compact, ergonomic design—now that’s high performance.

Features:

• Bumper Spikes – These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers – Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Pre-Separation Air Filtration System – This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner – The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Anti-Vibration System – STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ – The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Interlock – This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings – Housings are lightweight, durable, and corrosion resistant.
• Powerful Low Exhaust Emission Engine – A powerful low exhaust emission engine saves users fuel and operating costs without losing the power they count on to get the job done.
• Made in America – A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 12.3 lbs.
• Guide Bar Length (Recommended): 18 in.
• Oilomatic® Chain: .325" RM3
• Chain Oil Capacity: 8.12 oz.
• Engine Power: 3.49 bhp
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc

Width	Weight	Height	Length
0 Inch	12.3 Pounds	0 Inch	0 Inch

Description:

The MS 271 FARM BOSS® chainsaw is a powerful and fuel-efficient chainsaw with reduced exhaust emission engine technology. This chainsaw is built tough for felling, firewood cutting, and storm cleanup tasks.

The MS 271 FARM BOSS® chainsaw is a mighty boss of a chainsaw. Loaded with features and technology, the FARM BOSS® starts with a highly efficient engine that delivers 20% longer run times between refuelings—while cutting exhaust emissions in half compared to the previous model. The pre-separation air filtration system is extraordinarily effective. Your air filter can last up to five times longer. All this STIHL® engineering in one compact, ergonomic design—now that’s high performance.

Features:

• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Interlock - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Powerful Low Exhaust Emission Engine - A powerful low exhaust emission engine saves users fuel and operating costs without losing the power they count on to get the job done.
• Made in America - A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 12.3 lbs
• Recommended Guide Bar Length: 18 in
• Chain Type: .325" RM3 (OILOMATIC®)
• Chain Oil Capacity: 8.12 oz
• Engine Power: 3.49 bhp
• Fuel Capacity: 16.9 oz
• Displacement: 50.2 cc
• Intended Use: Farm/Ranch

Width	Weight	Height	Length
0 Inch	0 Gram	0 Inch	0 Inch

Description:

Designed for the most demanding tree care and forestry professionals, the STIHL® MS 400 C-M is built with STIHL® M-Tronic™ engine technology to deliver low exhaust emission, fuel-efficient performance even under changing conditions. Unlike its aluminum piston-equipped counterparts, the advanced magnesium piston in the MS 400 C-M provides greater displacement, power, and torque without additional weight. A long-life HD2 air filter means you simply clean it instead of replacing it, while a pre-separation system removes large debris before it even gets to the air filter, increasing run time between cleanings.

Features:

• Magnesium Alloy Piston - The magnesium alloy piston is lighter in weight than equivalent-size aluminum alloy pistons.
• Excellent Power-to-Weight Ratio (12.8 lbs./5.4 bhp) - Thanks to innovative engineering and construction, the MS 400 C-M delivers an excellent power-to-weight ratio.
• Modern Design - The modern design of the MS 400 C-M is an aesthetic reflection of the power and innovation this saw delivers.
• Lightweight (12.8 lbs.) - The MS 400 C-M professional chainsaw is designed to deliver lightweight performance and jobsite productivity.
• STIHL® M-Tronic™ - This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• STIHL® ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL®. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL® OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL® Quickstop® - STIHL® chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL® Quickstop® chain brake. The STIHL® Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator's hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL® Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Winter/Summer Shutter - The Winter/Summer Shutter allows the carburetor to operate at optimum temperature year-round and helps to prevent carburetor icing when working below 50°F (10°C).
• Adjustable Automatic Oiler - The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Translucent Fuel Tank - The semi-transparency allows operators to easily check the fuel level before starting work.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine's filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There's no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!

Specifications:

• Power Source: Gas
• Powerhead Weight: 12.8 lbs
• Guide Bar Length (Recommended): 25 in
• OILOMATIC® Chain: 3/8" RS3
• Chain Oil Capacity: 11 oz
• Engine Power: 5.4 bhp
• Fuel Capacity: 20.3 oz
• Displacement: 66.8 cc
• Intended Use: Professional

Note:( STIHL recommends #3624(33 RS3 72) OILOMATIC® Saw Chain and 20” 3003 008 8921 Ematic™ guide bar combination. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on. Compatible guide bar ranges: 16" to 25".)

Width	Weight	Height	Length
	12.8 Pounds		0 Inch

Description:

Meet your ideal business partner—the STIHL® MS 462 C-M chainsaw—specially engineered for the professional who desires more power with less weight. At just over 13 pounds, the MS 462 C-M is the lightest-ever STIHL® chainsaw produced in its fuel-powered class, helping reduce fatigue during daily forestry work. It features an excellent power-to-weight ratio for enhanced maneuverability, tested and proven by professionals in the field.

The next-generation STIHL M-Tronic™ engine management system electronically controls ignition timing and fuel metering, automatically adjusting for changes in the operating environment—such as altitude and fuel quality—to ensure optimal performance.

To further reduce vibration and user fatigue, the STIHL® anti-vibration system is designed for superior handling, even when the MS 462 C-M is equipped with longer guide bars.

Features:

• STIHL M-Tronic™
• This model features STIHL M-Tronic™ (M), a new generation of intelligent engine management. It eliminates the need for manual low- and high-speed carburetor adjustments and automatically compensates for factors like a dirty air filter, elevation changes, and fuel quality—ensuring optimal engine power at all times.
• STIHL ElastoStart™
• The ElastoStart™ starter handle includes a built-in shock absorber that reduces the effort needed to start the engine. It smooths out the compression forces during cranking, making starting easier and more comfortable.
• Ematic™ Lubrication System
• When paired with STIHL OILOMATIC® saw chains, the Ematic™ guide bar system ensures proper lubrication while reducing bar oil consumption by up to 50%. Two strategically placed ramps help channel oil to the bar and chain's most critical areas.
• STIHL Quickstop® Chain Brake
• The STIHL Quickstop® chain brake is designed to stop the chain's rotation in certain kickback situations—either by operator hand activation or automatically by inertia—reducing the risk of injury. It stops the chain within fractions of a second when triggered.
• Lightweight Portability
• Weighing just over 13 lbs, the MS 462 C-M is the lightest chainsaw in its fuel-powered class, offering outstanding maneuverability and reduced user fatigue for extended use in professional forestry applications.
• Adjustable Automatic Oiler
• Allows you to fine-tune lubrication to match bar length and cutting conditions—ideal for dry, dusty environments or extended cutting sessions.
• Winter/Summer Shutter
• Ensures optimal carburetor performance year-round by preventing carburetor icing in cold conditions (below 50°F / 10°C).
• Bumper Spikes
• Durable spikes improve stability and control when cutting, helping prevent pull-in and improving cutting precision.
• Decompression Valve
• Reduces cylinder pressure during startup for easier pull starts. Opens manually and automatically closes as the engine fires.
• Pre-Separation Air Filtration System
• Enhances filter efficiency and engine protection by using centrifugal force to eject heavier dirt particles before they reach the air filter—doubling the time between cleanings.
• Side-Access Chain Tensioner
• Makes chain adjustments faster and easier using a bar wrench—no need to reach behind the saw.
• Master Control Lever™
• A single, easy-to-use lever combines the choke, starting throttle lock, and on/off switch. Safety design ensures it can only be set to choke when the throttle is first engaged.
• Anti-Vibration System
• Minimizes vibration transfer to the user, improving comfort and reducing fatigue during long work sessions.
• Toolless Fuel and Oil Caps with Retainers
• Simply lift the lever and twist—no tools required. The caps stay attached for added convenience.
• Throttle Trigger Lock
• Built-in safety feature that prevents accidental throttle engagement.

Specifications:

• Power Source: Gas
• Powerhead Weight: 13.2 lbs
• Guide Bar Length (Recommended): 25 in.
• OILOMATIC® Chain: 3/8" RS3
• Chain Oil Capacity: 11.5 oz.
• Engine Power: 5.9 bhp
• Fuel Capacity: 24.3 oz.
• Displacement: 72.2 cc
• Intended Use: Professional

Width	Weight	Height	Length
	13.2 Pounds		0 Inch