Description:

As the most powerful AP System battery, the AP 500 S allows professionals to tackle larger jobs with more power than other batteries in the AP System. Built with STIHL®’s exclusive power laminate cell technology, the AP 500 S gives you up to a 2,500-cycle life. The AP 500 S offers an improved power-to-weight ratio and features 40% more power output and 20% more capacity than the AP 300 S. The AP 500 S is compatible with most tools in the AP System, allowing you to easily switch from one job to another. Additionally, this top-of-the-line professional battery comes with an exclusive battery management system that allows the motor’s electronic control system to compensate for the reduction in voltage by increasing amperage, resulting in consistent power over the entire running time.

This tool is IPX4-rated for weather-resistant construction and has been designed and tested for splash-water protection.

Features:

• IPX4 Rating - This tool is IPX4-rated for weather-resistant construction and has been designed and tested for splash-water protection.
• Advanced Cold Start Function - Start up faster than the AP 300 S in the cold with the advanced cold start function.
• Proprietary Battery Management System - The built-in proprietary battery management system offers up to a ten-year lifespan.
• Integrated with STIHL® Connected System - The AP 300 S is integrated with the STIHL® connected system, which gathers battery data and sends information via Bluetooth® to a user’s smartphone or other device.
• Best Power-to-Weight Ratio in the AP System - With the best power-to-weight ratio in the STIHL® AP System, the AP 500 S delivers sustained power and optimal handling without increasing user fatigue.
• Power Laminate Cell Technology - The AP 500 S features STIHL® exclusive power laminate cell technology that provides a cycle life of up to 2,500 charges, almost double the cycle life of the AP 300 S.
• Double the Life of Conventional Lithium-Ion - An excellent value, this battery has the highest energy content in the AP System featuring two times the lifespan of conventional lithium-ion.
• Compatible with AP System Products - This product is compatible with a range of professional AP System tools, allowing operators to easily switch between tools and complete work faster.
• LED Identification - LED identification allows you to activate LED indicators on the battery from your portal or app.
• Overload Protection - STIHL® technology communicates with electronic modules in the tool and charger to protect the system from overloading.
• Full Power Over the Entire Run Time - STIHL® batteries provide the same consistent power over the complete run time of the battery.
• LED Charge Indicator - The charge indicator light alerts users to battery status, maximizing what they can do On A Single Charge™.
• Efficient Batteries Offer a Compact Design - STIHL® batteries are designed to optimize power efficiency, allowing for smaller, more compact batteries.
• Optimized for Power, Performance, and Weight - STIHL® batteries deliver sustained power and optimal performance without the added weight.
• Durable Design - Durable design built with high-quality components.
• Truly Professional Battery - The AP 500 S has the durability, power, and run time to support the demands of professionals.

Specifications:

• Weight: 4.2 lbs
• Battery Energy Content: 337 Wh
• Battery Capacity: 9.4 Ah
• Battery System: AP System
• Voltage: 36 volts

Description:

The TS 420 is a compact, lightweight, and dependable cut-off machine recognized for its consistent day-to-day performance. Equipped with a 14" cutting wheel, it delivers a maximum cutting depth of up to 4.9 inches, making it versatile for a wide range of applications. It features the same high-performance components found in the TS 410, including the advanced X2 air filtration system, which ensures a cleaner-running engine and significantly reduces filter maintenance. Designed with both power and user convenience in mind, the TS 420 is engineered to handle demanding tasks with efficiency and ease.

Features:

• Water Connection - Water connection with shut-off valve and quick connector.
• Ergonomic Grip - The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
• STIHL® ElastoStart™ - The ElastoStart™ starter handle is a feature of STIHL®. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Bayonet-Style Filler Cap - Includes retainer for easy use, even with gloves on.
• Semi-Automatic Belt Tensioning - With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
• X2 Air Filtration System - The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.

Specifications:

• Power Source: Gas
• Weight: 21.2 lbs.
• Maximum Cutting Depth: 4.9 in.
• Maximum Wheel Size: 14 in.
• Maximum Spindle Speed: 5,350 rpm
• Arbor Size: 0.787
• Engine Speed: 9,000 rpm
• Engine Power: 4.4 bhp
• Fuel Capacity: 24 oz.
• Displacement: 66.7 cc

Description:

Features:

• Honda 270CC GX270 4-Cycle OHV Engine
• Higher torque for more power to move more snow
• Full ball-bearing support crankshaft for added durability
• Automatic decompression for easier starting
• Runs approx. 2.5 hours on a tank of fuel
• 120 Volt Electric Start w/ Recoil Back-Up
• Save your back and shoulders by simply pressing a button
• Hydrostatic Transmission
• Infinite number of forward and reverse speeds
• Single hand adjustment
• 210 Degree Chute Turning Radius
• Easily direct snow away from walkways and drives
• Throw snow up to 49 feet away - clear up to 50 tons of snow/hour
• Auger Height Adjustment System
• Set for max effectiveness on smooth, concrete or gravel surface
• Track Drive System
• Greater traction and stability on slippery surfaces
• Keeps auger housing on the ground to clear more snow
• Ice Breaking Serrated Auger
• Easily breaks thru heavily crusted or hard packed snow

Specifications:

Engine:

• Engine Brand: Honda GX270
• Engine Type: 4-Cycle OHV
• CC: 270 CCs
• Starting System: 120-Volt Electric /w Recoil
• Fuel Tank: 1.6 Gallons

Auger Housing / Chute Control:

• Stage Type: Two-Stage
• Profile: Steel 3-Blade
• Auger Material: Serrated Steel
• Chute Rotation: Basic Crank
• Turning Radius: 210 degrees
• Max Throwing Distance: 49 Feet
• Clearing Width: 28 Inches
• Intake Height: 20 Inches

Drive System:

• Drive: Hydrostatic
• Gear Case: Aluminum
• Reverse Speeds: Variable
• Tire Size: Tracks
• Forward Speeds: Variable

Options:

• Drift Cutters: Sold Separately
• Front Weights: Not Applicable
• Hand Warmers: No
• Headlight Type: Halogen
• Interlocking Controls: Yes
• Remote Deflector Controls: Yes
• Skid Shoes: Included - Reversible

Overview:

• Weight: 240 Pounds
• Consumer Warranty: 3 Years
• Commercial Warranty: 3 Years
• Product Length: 56.0 Inches
• Product Width: 28.5 Inches
• Product Height: 40.2 Inches

Description:

The DHS-3006 Handheld Pruning Saw is powered by ECHO's 56V Battery System, delivering exceptional performance for pruning and small limbing tasks. It boasts a 6 in. 80TXL cutting system, designed for precise and efficient cutting, ensuring clean and accurate results with every use.

Features:

• Powerful brushless motor provides gas-like power
• MAXOUT™ technology delivers maximum power
• 6 in. bar, 80TXL cutting system provides efficient cutting

OPTIONS AVAILABLE• 

• DHS-3006BT - Bare Tool
• DHS-3006X1 - Includes 2.5Ah Battery & Top Mount Charger

Specifications:

Power & Battery

• Voltage: 56V
• Motor: Brushless
• Battery: 2.5Ah
• Battery Capacity: 126 Watt-Hours

Charging & Warranty

• Standard & Rapid Chargers: 6" (likely a reference to compatibility or charge time, please clarify if needed)
• Bare Tool Warranty: 5 years (consumer) / 2 years (commercial)
• Battery Warranty: 2 years (consumer) / 2 years (commercial)

Description:

Ideal for domestic users, the BGA 57 is perfect for clearing jobs around the garden. This blower has great balance and blowing performance –all whilst retaining a low weight (2.2 kg) and sufficient working time for domestic use.

The BGA 57 can be used without the need for ear protection. An adjustable blower tube allows you the choice of 3 lengths to suit the users height. The operators control handle is easy to use, with the trigger lockout designed symmetrically for right or left handed use.

Specifications

• Rated Voltage: 36 V
• Battery System: AK
• Blowing Force (with Round Nozzle): 9 N
• IPX Rating: N/A
• Max. Air Velocity (with Round Nozzle): 55 m/s
• Max. Air Velocity (with Flat Nozzle): 60 m/s
• Air Throughput (with Round Nozzle): 620 m³/h
• Air Throughput (with Flat Nozzle): 560 m³/h
• Battery Working Time (AK 10, Power Level 1): Up to 10 min
• Battery Working Time (AK 20, Power Level 1): Up to 22 min
• Battery Working Time (AK 30 S, Power Level 1): Up to 27 min
• Sound Pressure Level: 79 dB(A)
• Sound Pressure Level (at 15 m Distance): 57 dB(A)
• Sound Power Level: 90 dB(A)
• Vibration Level (Right): 0.6 m/s²

Description:

Landscaping professionals looking for a simplified and convenient trimming solution will love the STIHL® FS 131 trimmer. With its low exhaust emission, 36.3 cc engine and a larger fuel tank than the previous model, the FS 131 delivers 30% longer run times. Its bike-handle design includes rubberized grips for enhanced grasp and comfort. Improved air filtration and the STIHL® exclusive IntelliCarb™ technology make this trimmer a great choice for pros, but the cherry on top is the solid steel drive shaft that accepts a wide range of heavy-duty cutting heads, including metal blades.

Features:

• Straps and Harnesses – They distribute the load from your hands to your shoulders. They also help reduce operator fatigue and make it easier to use trimmers, brushcutters and clearing saws for extended periods.
• TapAction™ AutoCut® Cutting Head – TapAction™ allows users to adjust the line length simply by tapping the AutoCut® cutting head against the ground.
• IntelliCarb™ Compensating Carburetor – The IntelliCarb™ Compensating Carburetor measures the air pressure on the clean side of the air filter and adjusts the metering diaphragm in the carburetor. This keeps the RPM at a consistent level, even when the air filter begins to clog.
• Bike Handle – When used in conjunction with a harness, the bike handle allows the machine to be easily guided, enabling a smooth horizontal mowing action to cover large areas quickly and efficiently. With soft grips for increased comfort, the bike handle provides greater control and helps reduce operator fatigue.
• Start/Run/Stop Controls on Handle – Controls on Handle
• Anti-Vibration System – STIHL® has a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Shoulder Strap / Carrying System – Using a shoulder strap or carrying system helps distribute the weight of the equipment for increased operator comfort and improved maneuverability.
• Tool-Free Handle Adjustment – The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated 90°.
• Multi-Function Control Handle – Having easy access to all of the controls on one comfortable handle makes it easy to complete tasks so the operator’s hand never has to leave the handle.
• Simplified Starting Procedure – To get started, users simply pump the fuel primer, set the choke, and pull the starter cord. The built-in stop switch allows the user to turn off the engine with a simple press of the button. When the engine is off, the throttle lock automatically returns to the "start" setting. The tool will be ready to start again when the user is ready to get back to work.
• Air Filter Cover – Easily remove the cover for fast and easy filter cleaning or replacement.
• Protected or Enclosed Control Cables – Dangling and loose wires are eliminated.
• Protected Spark Arrestor Muffler – Large baffles reduce noise level and contain a screen designed to reduce the emission of sparks.
• Protected Spark Plug – The spark plug is protected yet easy to change.
• Protected Choke Lever/Knob – The choke is protected to help prevent damage.
• High-Tech Polymer Housing – Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Heavy-Duty Steel-On-Steel Clutch – Centrifugal clutch is designed to reduce slippage.
• Purge Pump Primer – By pressing the bulb, this small fuel pump delivers fuel to the carburetor, reducing the number of starting pulls needed after an extended break between uses.
• Upright Translucent Fuel Tank – Easily check the fuel level before starting work. If fuel is needed, the upright position makes the tank easier to fill.
• Fully-Lined Drive Shaft – A lined shaft provides smooth operation and less vibration.
• Throttle Trigger Interlock – This safety feature must be depressed before the trigger can be activated.
• Made in America – A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Weight: 12.8 lbs.
• Power Source: Gas
• Cutting Width: 16.5 in.
• Engine Power: 1.9 bhp
• Fuel Capacity: 24 oz.
• Displacement: 36.3 cc

Description:

580BTS

Increase your crews productivity with the powerful Husqvarna 580BTS backpack blower. Designed with a larger fuel tank, a reliable 2-stroke engine and efficient fan design, tackle large jobs with fewer interruptions throughout the day. In addition, the hip/belt strap offers better weight distribution, making it more comfortable to blow lawn clippings, leaves and other heavy debris over long periods of time. Equip your team with the 580BTS backpack blower and experience higher blowing performance for a job well done.

Specifications:

Engine:

• SKU: 970 49 91‑01
• Cylinder Displacement: 75.6 cm³
• Output Shaft Power: 4.59 hp
• Fuel Tank Volume: 87.92 fl oz (US)
• Fuel Consumption: 464 g/kWh
• Maximum Power Speed: 7,450 rpm
• Idling Speed: 2,000 rpm
• Electrode Gap: 0.03 in

Capacity:

• Air Flow in Housing: 1,200 cfm
• Air Flow in Pipe: 1,000 cfm
• Air Speed (Round Nozzle): 220 mph
• Max Blow Force: 47 N
• Air Speed: 219.22 mph

Dimensions:

• Weight: 26.8 lbs
• Product Size (Height): 21.61 in
• Product Size (Length): 12.76 in
• Product Size (Width): 20.24 in
• Tube Diameter: 3.386 in

Sound and Noise:

• Sound Pressure Level at Operator's Ear: 106 dB(A)
• Sound Power Level, Measured: 113 dB(A)
• Sound Power Level, Guaranteed (LWA): 115 dB(A)

Description:

Features:

• Self-propelled, hydrostatic, commercial grade transmission
• Roto-Stop® blade stop system
• Rugged features for commercial use
• Easy starting commercial GXV160 Honda engine

Specifications:

• Official Model Name: HRC216K3HXPH
• Carton Label: HRC2163HXP
• Engine: GXV160
• Deck Material: Steel – 16 ga
• Cutting Width: 21"
• Mowing Height Range: 3/4" - 4"
• Mowing Height Adjustments: 8
• Transmission: Cruise Control (Hydrostatic)
• Ground Speed: 2.1 to 4.0 mph
• Starter: Recoil
• Choke System: Manual
• Throttle Control: Manual
• Drive: Shaft
• Handle: 1" Steel Tube
• Steel Deck Guards: Standard
• Wheels: 9" Nexite
• Ball Bearing Wheels: All
• Standard Functions: 3 in 1 Capable (Mulch/Bag, Optional Side Discharge)
• Bag: Standard
• Bag Capacity: 2.5 bushels
• Blade(s): Twin blades (MicroCut System®)
• Blade Control: Blade stop system (Roto-Stop®)
• Side/Rear Discharge: Rear Mount Optional
• Fuel Tank Capacity: 0.37 gallons
• Dry Weight: 123 lbs
• Operating Weight: 127 lbs
• Residential Warranty: 2 years
• Commercial Warranty: 1 year
• CA Compliant: Not for sale in California

Description:

Accomplish everything from felling to limbing with the MSA 220 C-B battery chainsaw, featuring 250 watts more power than the previous model. Plus, experience increased maneuverability with the Light 04 guide bar and smooth-cutting performance with the 3/8” STIHL PICCO™ PM3 saw chain. Lightweight with zero exhaust emissions, this AP Professional System chainsaw offers up to 40 minutes of run time when paired with the AP 300 S battery. The brushless motor allows for fast acceleration and low maintenance, so you can enjoy powerful performance and maximum efficiency.

Run time may vary based on battery type, charge level and capacity, model, operating style, and conditions. Batteries and chargers can be purchased separately or as a combined set with tool.

This tool is IPX4-rated for weather-resistant construction and has been designed and tested for splash-water protection.

Specifications:

• Power Source:
• Battery
• Powerhead Weight:
• 6.8 lbs
• Weight (with AP 300 S battery):
• 12.2 lbs
• Guide Bar Length (Recommended):
• 16 in
• Oilomatic® Chain:
• 3/8" STIHL PICCO™ Super
• Chain Oil Capacity:
• 7.1 oz
• Battery System:
• AP System
• Run Time (with AP 300 S battery):
• Up to 40 minutes
• Voltage:
• 36 volt
• Intended Use:
• Professional

Description:

Add a professionally landscaped look to sidewalks, walkways and driveways with the STIHL® FC 91 edger. With its large 710 cc fuel tank and low-emission engine, this professional edger delivers 30% longer run times than the FC 90. It features a vertical pleated air filter for better filtration and STIHL®-exclusive IntelliCarb™ technology for maximum RPMs when air filter begins to clog. It also features one touch stop and a simplified starting procedure enabled by the semi-automatic choke lever. It’s a must-have for high-volume landscaping professionals.

Specifications:

• Displacement: 28.4 cc (1.73 cu. in.)
• Engine Power: 0.95 kW (1.27 bhp)
• Weight: 6.0 kg (13.2 lbs.)
• Fuel Capacity: 710 cc (24.0 oz.)
• Blade Size: 20.3 cm (8.0 in.)
• Arbor Size: 25.4 mm (1.0 in.)
• Gear Ratio & Blade Speed: 1:1.235, 8,100 rpm
• Power Source: Gas

Description:

Professionals rely on the GXV160 to deliver reliable, easy starting, fuel efficient performance, day in and day out.

Features:

• Lawn mowers
• Commercial lawn and garden equipment
• Forestry equipment
• Construction / industrial equipment
• Agricultural equipment

Specifications:

• Honda GXV160 Engine
• Engine Type:
• Air-cooled 4-stroke OHV
• Bore x Stroke:
• 68 x 45 mm
• Displacement:
• 163 cm³
• Net Power Output:
• 4.3 hp (3.2 kW) @ 3,600 rpm
• Net Torque:
• 7.1 lb-ft (9.6 Nm) @ 2,500 rpm
• PTO Shaft Rotation:
• Counterclockwise (from PTO shaft side)
• Compression Ratio:
• 8.0:1
• Carburetor:
• Float Type
• Ignition System:
• Transistorized magneto
• Starting System:
• Recoil
• Lubrication System:
• Splash
• Governor System:
• Centrifugal Mechanical
• Air Cleaner:
• Dual element
• Oil Capacity:
• 0.69 US qt (0.65 L)
• Fuel Tank Capacity:
• 1.5 US qt (1.4 L)
• Fuel:
• Unleaded 86 octane or higher
• Dry Weight:
• 32 lb (14.5 kg)
• Dimensions:
• Length: 16.3" (415 mm)
• Width: 14.1" (359 mm)
• Height: 13.9" (354 mm)

Description:

Clean, professional-looking landscaping in less time. The PE-2620 curved-shaft edger combines power and torque with lightweight construction, allowing pros to comfortably carve through dense dirt and cover more ground during long workdays.

Features:

• 2:1 gear reduction to power through tough overgrown grass
• Two-stage air filtration system increases cleaning capability and allows for longer maintenance intervals
• 25.4 cc professional-grade, 2-stroke engine

Specification:

• Engine & Fuel:
• Engine Displacement: 25.4 cc
• Carburetor: Rotary-Valve Diaphragm
• Fuel Capacity: 20.6 fl. oz.
• Starting System: Standard
• Cutting System:
• Blade Length: 7.75 inches
• Blade Thickness: 0.09 inches
• Debris Shield: Die-Cast Metal
• Dimensions & Weight:
• Dry Weight: 14.1 lbs
• Warranty:
• Tool Warranty: 5 years (consumer) / 2 years (commercial).

Description:

The Husqvarna Z500 series zero turn mower represents the latest design focused on productivity, durability and cut quality. Providing extreme comfort, high ground speeds and superior traction adds up to exceptional mowing efficiency. Industrial strength throughout the entire design assures of a long & durable service life in commercial mowing applications. Careful design consideration provides unprecedented ease in serviceability.

Specifications:

General

• Cutting Width: 152 cm
• Max Speed (Forward): 19.3 km/h
• Fuel Tank Capacity: 45.4 L

Cutting Deck

• Type: 7-gauge fabricated
• Cutting Height Range: 25.4 mm - 127 mm

Engine

• Manufacturer: Kawasaki
• Model: FX Series V-Twin
• Displacement: 999 cm³

Dimensions & Weight

• Weight: 594 kg

Other Features

• Seat: Premium, suspension
• Connectivity: Not applicable

Description:

Features:

• Honda 35cc 4-stroke engine
• Runs on straight, unleaded gas (no mixing)
• 17" Semi-matic (bump feed) head with Ultra Quiet® line

Specification:

Honda GX35 Engine

• Engine: GX35
• Displacement: 2.18 cu. in. (35.8 cc)
• Fuel: Unleaded Gasoline (86 Octane or higher)
• Fuel Tank Capacity: 22.0 fl oz (650 ml)
• Carburetor: Diaphragm Type with Fuel Pump
• Idle Speed: 3,100 +/- 200 rpm
• Max. (No Load) RPM: 10,000 rpm (without cutting head)
• Dimensions (L x W x H): 73.8 in. x 12.8 in. x 10.2 in. (187.4 cm x 32.5 cm x 25.9 cm)
• Dry Weight:
• Without Cutting Head: 14.8 lbs (6.7 kg)
• With Cutting Head: 15.5 lbs (7.0 kg)
• Engine Stop Switch: Slide Type Switch
• Throttle Control: Two Motion Trigger
• Main Pipe Diameter: 1.0 in. (25.4 mm)
• Main Pipe Thickness: 0.06 in. (1.5 mm, Aluminum)
• Drive Shaft: Flexible Steel Cable
• Shaft Support: Nylon Support Sleeve
• Gear Ratio: 1.235
• Handle Type: Loop Type
• Cutting Head: Semi-matic Feed-Nylon
• Line Type: Ultra Quiet
• Cutting Width: 17"
• Single Harness: Standard
• Double Harness: Optional (must be used with all blade applications)
• Steel Blade: 9" or 10" Blades Optional (requires barrier kit)
• Blade Barrier Kit: Optional (must be used with all blade applications)
• Residential Warranty: 2 years
• Commercial Warranty: 1 year
• CA Compliant: Yes

Description:

Promising next-generation cutting performance, the Husqvarna 565 lets you work faster and more efficiently with longer guide bars. Excellent cooling capacity and state-of-the art filtration empower you to tackle the most demanding tasks. Equipped with revamped AutoTune™ and Air Injection™ and offering low vibrations, the 565 is a powerful yet ergonomically designed chainsaw for fast, safe work.

Specifications:

• Engine
• SKU: 966 73 39‑08
• Chain speed at max power: 67.9 fts
• Cylinder displacement: 70.6 cm³
• Output shaft power: 5 hp
• Maximum torque: 4.2 Nm
• Maximum torque at RPM: 6,900 rpm
• Clutch engagement speed: 3,800 rpm
• Electrode gap: 0.02 in
• Idling speed: 2,700 rpm
• Ignition module air gap: 0.01 in
• Maximum power speed: 9,300 rpm
• Oil pump type: Adjustable flow, no flow at idle
• Spark Plug: NGK BPMR7A
• Equipment Compatibility:
• Recommended bar length (min): 15 in
• Pitch: 3/8"
• Recommended bar length (max): 28 in
• Chain type: C83
• Bar length: 60 cm (24 in)
• Sprocket type: Rim 7
• Gauge: .050"
• Dimensions & Weight:
• Weight (excluding cutting equipment): 14.3 lbs
• Sound & Noise Levels:
• Sound pressure level at operator's ear: 105 dB(A)
• Sound power level, guaranteed (LWA): 119 dB(A)
• Sound power level, measured: 117 dB(A)
• Vibration Levels:
• Equivalent vibration level (ahv, eq) rear handle: 5.3 m/s²
• Equivalent vibration level (ahv, eq) front handle: 5.2 m/s²
• Lubricant & Oil:
• Oil tank volume: 0.7 US pint
• Lubricant type (Engine): Husqvarna 2-stroke or equivalent at 50:1
• Emission:
• Exhaust emissions (CO₂ EU V): 804 g/kWh

Description:

With its articulating blade offering a cutting range of 145º in 13 locking positions, the HL 94 K (145º) extended reach hedge trimmer allows landscapers to precisely trim difficult angles of hedges. Built for professionals with easy maneuverability in mind, the HL 94 K (145º) has a lightweight gearbox and a powerful, low exhaust emission engine to tackle tough jobs. This extended reach hedge trimmer also features the STIHL®-exclusive ECOSPEED throttle set wheel for variable speed control, as well as an automatic choke lever which simplifies the starting procedure to just three quick steps. Finally, rubber control handles provide a comfortable grip, letting you cut with ease and confidence.

Features:

• Double-Sided Blades - The dual-ground blade system provides a clean cut and is ideal for cutting through stronger, thicker branches.
• Made in America - A majority of STIHL® products sold in America are made in America of U.S. and global materials.
• Multi-Function Control Handle - Having easy access to all of the controls on one comfortable handle helps makes it easier to complete tasks so the operator’s hand never has to leave the handle.

Specifications:

• Power Source: Gas
• Weight: 12.8 lbs. (5.8 kg)
• Blade Length: 24 in. (61 cm)
• Cutting Attachment: 24 in / 145° head
• Shaft Length: 42 in. (106.7 cm)
• Overall Length: 78 in. (198.1 cm)
• Engine Power: 1.2 bhp (0.89 kW)
• Fuel Capacity: 18.3 oz. (542.5 cc)
• Displacement: 24.1 cc (1.47 cu. in.)